SPECIFICATIONS

 

TRIPLE SECTION MK9 BEAM FRAME AND SINGLE SIDE SWING ARM WITH RC30 HUB, SPONDON 320MM DISCS, FUEL TANK WITH GAMMA TAP, CLIP-ONS, FOOTRESTS & HANGERS, CATCH-TANK THAT'S USED AS THE OIL TANK AND YOKES. NWS FAIRING TOP STAYS AND NOSE CONE MOUNT.
OHLINS, WITH ALL THE ADJUSTABILITY TO GET INTO TROUBLE WITH, REAR SHOCK, '96 FIREBLADE CONVENTIONAL FORKS, MAXTON'D

, LOCKHEED 4 POT CALIPERS & ADJUSTABLE MASTER CYL, FERRODO FRP410 PADS

LOCALLY MADE ALLOY CALIPER MOUNTS. REAR IS DINKY BREMBO 2 POT & MASTER CYL GRIPPING 200MM SOLID DISC, MAXTON STEERING DAMPER.
MARVIC 3 SPOKES, 5.5IN REAR, 3.5IN FRONT WITH RIGHT NOW 120/70 DRAGON CORSE FRONT & 180/55 STD COMPOUND DRAGON REAR
STD RG500 MOTOR, CARBS, ELECTRICS, RADIATOR ON HOMEMADE BRACKETS, WITH HUXLEY PIPES, CARBON SILENCERS ON THE TWO YOU CAN SEE, THE UNDERSEAT ONES GET TOO HOT AND DISCOLOUR ACCORDING TO THE MAN HIMSELF.
FAIRING IN CARBON BY SPR REWORKED ZXR400 BASED DESIGN WITH COOL IDEA BUT A BUGGER TO MAKE SIDESTAND FLAP, SEAT UNIT IS REWORKED RGV M ONE WHICH FITS AROUND THE TOP EXHAUSTS WITHOUT MODDING AND SEAT, SPR FIREBLADE FRONT MUDGUARD, ZXR400 HEADLAMP, MIRRORS, INDICATORS & REAR LIGHT FITTED UPSIDE DOWN TO FRENCH LUSHLY INTO SEAT UNIT.
CARBON HOMEMADE STUFF - HUGE, BAFFLED AIRBOXES, FULLY ENCLOSING CARBS, WITH FOAM FILTERS WELL AWAY FROM THE CARB MOUTHS IN FORWARD FACING INTAKES, BATTERY HOUSING, CHAINGUARD, NO. PLATE BRACKET, HEADLIGHT COVER, SIDE EXITING SPANNIE BRACKET, QUICK RELEASE PILLION SEAT COVER (SO I CAN GET AT THE OIL TANK) RADIATOR CATCH TANK, UNDER RADIATOR FAIRING INSERT, CARB BELLMOUTHS, ALTERNATOR COVER, FUSEBOX, CDI/P.V./SPEEDO BLACK BOXES MOUNT, LOADS OF OTHER ALLOY/CARBON BRACKETS YOU SPEND HOURS MAKING, AND REMAKING.
SPA COMBINED TACHO/TEMP GAUGE AND BRANTZ RALLYCAR LED SPEEDO WHICH READS OFF THE FRONT DISC BOLTS IN CARBON/FOAM HOMEMADE DASH. RG SWITCHGEAR.
LOTS OF ALLOY/TITANIUM/WICKED AIRCRAFT KAYNAR NUTS/BOLTS
DOWN FOR UP GEARCHANGE.
LOTS OF LOCKWIRE.

PROPS TO:
MATT COULTER FOR ENGINE AND SUPERB QUAD STUNTS
SPR CARBON IN NOTTINGHAM.
CENTRAL INTERNATIONAL BRAKING STUFF, THEY KNOW WHAT THEY'RE TALKING ABOUT, NOT LIKE DEMON TWEEKS.
ALL @SPONDON FOR ALLOY ARTISTRY THAT SHOULD BE ENTERED FOR A TURNER PRIZE.
TIM @HOBBSPORT FOR BOLTS 'N' THAT, EVEN THO' HE LIKES THE CULT?!
FOLKS @KEITH PARNELL M/CYCLES FOR ALLSORTS OF PARTS 'N' STUFF AND MOT'S.
NWS FOR A FEW BRACKETS 'N' THAT.
DAMERELLS @ST AUSTELL FOR VARIOUS HONDA BITS.
STAN STEVENS (LOCAL LAD) FOR REBORE, GEN' MANUAL 'N' BITS.
BOB FARNHAM FOR DYNO.
TONY DAWSON FOR SPA STUFF AND GETTING IT TO WORK PROPERLY!
MERLIN MOTORSPORT FOR LOADS OF BENDY ALLOY, HEATSHIELD, AIRFILTERS AND AIRCRAFT NUTS.
VEHICLE WIRING PRODUCTS FOR MILES OF WIRES AND ELECTRICAL GUBBINS LIKE COOL, TINY LED WARNING LIGHTS FOR DASH, COULD PROBABLY USE THE YELLOW ONES FOR INDICATORS, ONLY 12MM WIDE!
SID FOR CARBON SKILLS.
JUSTIN FOR FRONT WHEEL SPACERS.